WRM247 LTE

WRM247 LTE wireframe image

Intelligent IoT Edge Device

WRM247 LTE is a robust device for remote management, measurement and control. The device can be used independently or as a part of Internet of Things platform such as IoT-TICKET®.

Designed by Wapice, it has complete customization opportunities to meet the requirements of industrial conditions. Wapice also provides complete software development services for the target system.

Features

  • Data acquisition & remote control device
  • Cellular & wireless connectivity
  • Fieldbus interfaces
  • Digital and analog IO
  • Update and configure remotely
  • Complete, secure solution
  • Easy to install

WRM247 LTE device

Connectivity

Connector Connectivity
Connector 1 Power input, Digital out Supply, Digital out 1, Digital in 1
Connector 2 Analog input, Current input
Connector 3 USB, Digital out 2-4
Connector 4 RS485, Digital in 2-4
Connector 5 CAN 1, RS-232, +5V out
Connector 6 CAN 2, 1-Wire, Debug RS-232
Connector 7 Ethernet 1
Connector 8 Ethernet 2

Modules

1-Wire -icon

1-Wire

Acceleration -icon

Acceleration

Bacnet -icon

Bacnet

CANopen -icon

CANopen

CANopen -icon

CANopen

Events -icon

Events

GPS -icon

GPS

Hardware I/0 -icon

Hardware I/0

ISOBUS -icon

ISOBUS

Modbus - RTU -icon

Modbus - RTU

Modbus - TCP -icon

Modbus - TCP

Modbus - ASCII -icon

Modbus - ASCII

NMEA-0183 -icon

NMEA-0183

OBD -icon

OBD

Rest Client -icon

Rest Client

Time -icon

Time

VSE Protocol -icon

VSE Protocol

Webro Sensor -icon

Webro Sensor

Technical Specifications

Processor ARM® CortexTM-A5, 536MHz
RAM 512MB DDR2
Flash 256MB NAND Flash
Multimedia Card 1 Micro SD slot
Wireless connectivity 4G/3G/2G, WLAN, WPAN, external antennas
GNSS GNSS: L1 Band GPS, GLONASS, BEIDOU & GALILEO
Ethernet 10/100 Mbps 2 (4 pin Ethernet M12 industrial connectors)
CAN 2
RS-485 1
RS-232 1
1-Wire 1
USB 1 x host
Digital output 4 x 0 / 5-30 V, max 200mA current output
Digital input 4 x 0 / 5-30 V
Analog input 2x0-22 mA and 2 x 0-30 V
Input voltage range 7 – 56 Vdc
LED 1 programmable red/ green LED, GSM LED and 2 x Ethernet LED
Accelerometer Digital, triaxial, 16 bit, ±2g/±4g/±8g/±16g
Supported operating system Real Time Linux
RTC Back-up battery Yes
IP Class IP 65
Operating temperature -30°C to +60°C
Weight ~615 g (approx)
Dimensions 173 x 95 x 67 mm (without antennas)

WRM247+ image

WRM 247+ (discontinued)

WRM 247+ is the previous version in the WRM 247 series, which is compatible with the LTE model in terms of connectors, and the same cable sets are used for both. WRM 247+ can be ordered in small quantities until the stock lasts.

WRM247+ datasheet
EU declaration of conformity